This system was mostly invented for use in Python Rakes. Usually a python rake has the following CC -- LOCO Rake 1 Loco Rake 2. The 1st loco and the 2nd loco will communicate wirelessly via Radio Frequency. The radio frequency devices fitted in both locos will get synchronized, so when the lead loco will apply brake or increase notch or when release MR or brake pressure or any other activities , then these will be also effective in the trailing loco.
.
If locos are MUed Together then also these activities can...
more... be done by the lead loco and the effects will be reflected on the rear loco.
But to do with through radio frequency, DPWCS is used.
Also used in Push Pull Freight
please wait...Translate to EnglishThis system was mostly made for Python rakes. Usually, a python rake has the following setup: LOCO Rake 1 and Loco Rake 2. The first loco and the second loco communicate wirelessly using Radio Frequency. The radio frequency devices in both locos sync up, so when the lead loco applies the brakes or increases speed or releases pressure, it also affects the trailing loco.
.
If the locos are MUed together, the lead loco can control these actions and they will also affect the rear loco.
But to do this through radio frequency, DPWCS is used.
It is also used in Push Pull Freight.
please wait...Translate to HindiIs system ko mostly Python Rakes mein istemal ke liye banaya gaya tha. Aam taur par, ek pyth